Film Division
Arta Plast’s is one of the largest manufacturers of Multi-layered polyethylene films. The film production equipment consist of 3 and 5 layer films made by Germany’s Wind Moller with the thickness of 20 up to 350 Micron and maximum of 2200mm in sheets and 4400 mm in the form of tubes.
The list of film products are:
5 layer with EVOH or Polyamide layer (suitable for packaging of long term products, Thermoforming and laminate.
- Laminate films for Doypack and Sachet
- Pre Pack films for the Dairy Industry
- Films specific to Cellulose and Health Products Industry
- FFS films for packaging of Petrochemical Products equipped with Embossing and Gusseting.
- Industrial shrink pack films with superior mechanical properties, good for food industries.
- Protection films to be used as Industrial Protective Covering for metal, steel and composite sheets and construction material.
- Common films for Outdoor Advertising
Design Division
This division takes advantage of capabilities of its highly experienced and professional design staff and most advanced design and photography systems to provide within shortest time possible charge-free consultation service in the course of printing and packaging and design-related affairs.
Printing division No.1
This division provides the service of 10- color flexo print, with a maximum width of 1300mm on a variety of PE, BOPP, PET, PVC, AI, OPA and PA films making use of Europe’s state of the art technology of Europe and the systems made by Fischer & Krecke, Germany.
Printing Division No.2
Third division provides the service of a 4-color print on specialty films like FFS and such additional services such as Gusseting and Embossing. The high quality systems used in this unit are made by Wind Muller of Germany with the capability of winding/ unwinding the holts to a maximum diameter of 1500mm.
Laminate Division
2 and 3 layer heat seal and cold seal Laminates and coverings with various thicknesses and production of composite films with solvent free and solvent adhesive properties are made with advanced equipment from Italy’s Nordmeccanica with 400 meters per minutes speed.
Also this equipment can add adhesive on the back of protective films covering sheets and composite coverings.
Cutting Division
The machinery in this unit are capable of cutting polymer films such as PET, BOPP, PE, Paper, Aluminum Foils of different widths (3-1300cm). The machinery used in the unit is made by Germany’s PSA company with a maximum capacity of cutting at a rate of 600m/1 min.
Packet/Bags Sewing Unit
This unit is equipped with high speed lines for sewing and production of bags and sacks used in advertising with durable thermal, adhesive based handles and also handles with strings. The unit can also provide three-sided sewing for vacuum sacks.
Quality control Unit
With a state of the Art Laboratory, Quality Control procedures and Material Testing is continuously performed on packaging plastic of various specifications. It includes performing Tension Testing systems using Germany’s ZWICK, Oxygen Throughput Rate (OTR) and Water Vapor Throughput Rate (WVTR) testing using equipment made by Britain’s SYSTECH on all films passing through the production line. Meanwhile, Quality Control Inspectors continuously monitor all incoming raw materials, the materials going through the production process and the final products.
